Showing 65–80 of 94 results
-
-
MANUAL WHEEL BALANCER FOR INDUSTRIAL VEHICLES | IEQPL9005
SKU: IEQPL9005• Car mode and truck mode
TECHNICAL SPECIFICATIONS
• Unbalance weight adjustable in increments of 5 or 10 g
• 3 balancing modes for alloy wheels
• Balancing mode for steel wheels
• Weight distribution function for alloy wheels
• Foot brake -
-
MOBILE COLUMN WITH WIRELESS SYSTEM | IEQ8500
SKU: IEQ8500• Designed for heavy goods vehicles:
TECHNICAL SPECIFICATIONS
buses, crane lorries, lorries, motorhomes, etc.
• Lifting system combinable with 2–16 columns
• Automatic control system for adjusting
lifting/lowering speed
• Columns can be programmed as
primary or secondary
• Touchscreen with instructions
• Adjustable forks for different
tyre diameters
• Safety stop (in the event of failure
or desynchronisation) -
MOBILE SCISSOR LIFT | IEQ1016
SKU: IEQ1016• Small mobile hydraulic scissor lift (do not move it whilst a vehicle is on the lift)
TECHNICAL SPECIFICATIONS
• No installation required
• Ramp length adjustable from 1400 mm to 1916 mm
• Vehicles are lifted by securing them ‘under the chassis’
• Safety system with ratchet straps
• Mobility kit included -
MOBILE SCISSOR LIFT | IEQ1516
SKU: IEQ1516• Movable kit devices
TECHNICAL SPECIFICATIONS
• Extensible fixed ramps
• Electric unlock system
• Mechanical locking system
• Maximum height limit switch
• Boot system to lift heavier weights from the lowest position
• No installation required -
MOBILE SINGLE-COLUMN LIFT | IEQ0020
SKU: IEQ0020MOBILE SINGLE-COLUMN LIFT
TECHNICAL SPECIFICATIONS
• Lifting capacity from the chassis
or the wheels
• Hydropneumatic operation
• Pneumatic foot pumps included -
MODULAR UNIT + SINGLE-DOOR CABINET – STAINLESS STEEL | IEQ5601
SKU: IEQ5601• Tall cabinet:
· 2 m high
· 61.5 cm deep
· 4 storage shelves
• Three upper cabinets with soft-close hinges
• 2 metres of tool-holding panel
• Worktop 61.5 cm deep
• Low cabinet with two doors and one shelf
• Cleaning module with roll holder, waste bin and drawer
• Load capacity: 800 kg
• Load capacity per shelf: 45 kgThis modular workshop furniture system has been designed to optimise the organisation and comfort of your workspace.
It allows you to arrange your tools efficiently, thereby creating a practical and effective environment. -
-
-
PISTON COMPRESSOR | ICO250
SKU: ICO250• Actual flow rate (at maximum pressure): 8 m³/h
TECHNICAL SPECIFICATIONS
• Maximum pressure: 8 bar
• Direct coupling
• Power supply: 220 V single-phase
• Dimensions: 770 x 430 x 660 mm
• Weight: 32 kg
• Connection: coupler
• Noise level: 70 dB(A)
• Cylinder / stages: 1/1
• Current: 7 Amp -
PORTABLE LED TORCH | IEQ4003
SKU: IEQ4003• 3 lighting modes: medium / high / torch
TECHNICAL SPECIFICATIONS
• Maximum brightness: 110 lumens
• Main / secondary light: 2 W COB LED / 1 W SMD LED
• Battery life: 4 h 30 min / 2 h 30 min / 8 h
• Charging time: 2 hours
• 3.7 V lithium-ion battery – 1000 mAh
• Impact resistance: 1.5 m (IK07)
• Splash-proof (IPX-4)
• Net weight: 108 g
Includes Type-C cable, no mains plug -
-
-
-
